A demand for power to generate electricity stimulated new thinking about the steam engine in the 1880s. The problem was that of achieving a sufficiently high rotational speed to make the dynamos function efficiently. Such speeds were beyond the range of the normal reciprocating engine (i.e., with a piston moving backward and forward in a cylinder). Designers began to investigate the possibilities of radical modifications to the reciprocating engine to achieve the speeds desired, or of devising a steam engine working on a completely different principle. In the first category, one solution was to enclose the working parts of the engine and force a lubricant around them under pressure. The Willans engine design, for instance, was of this type and was widely adopted in early British power stations. Another important modification in the reciprocating design was the uniflow engine, which increased efficiency by exhausting steam from ports in the centre of the cylinder instead of requiring it to change its direction of flow in the cylinder with every movement of the piston. Full success in achieving a high-speed steam engine, however, depended on the steam turbine, a design of such novelty that it constituted a major technological innovation. This was invented by Sir Charles Parsons in 1884. By passing steam through the blades of a series of rotors of gradually increasing size (to allow for the expansion of the steam) the energy of the steam was converted to very rapid circular motion, which was ideal for generating electricity. Many refinements have since been made in turbine construction and the size of turbines has been vastly increased, but the basic principles remain the same, and this method still provides the main source of electric power except in those areas in which the mountainous terrain permits the economic generation of hydroelectric power by water turbines. Even the most modern nuclear power plants use steam turbines because technology has not yet solved the problem of transforming nuclear energy directly into electricity. In marine propulsion, too, the steam turbine remains an important source of power despite competition from the internal-combustion engine. Electricity
The development of electricity as a source of power preceded this conjunction with steam power late in the 19th century. The pioneering work had been done by an international collection of scientists including Benjamin Franklin of Pennsylvania, Alessandro Volta of the University of Pavia, Italy, and Michael Faraday of Britain. It was the latter who had demonstrated the nature of the elusive relationship between electricity and magnetism in 1831, and his experiments provided the point of departure for both the mechanical generation of electric current, previously available only from chemical reactions within voltaic piles or batteries, and the utilization of such current in electric motors. Both the mechanical generator and the motor depend on the rotation of a continuous coil of conducting wire between the poles of a strong magnet: turning the coil produces a current in it, while passing a current through the coil causes it to turn. Both generators and motors underwent substantial development in the middle decades of the 19th century. In particular, French, German, Belgian, and Swiss engineers evolved the most satisfactory forms of armature (the coil of wire) and produced the dynamo, which made the large-scale generation of electricity commercially feasible.
The next problem was that of finding a market. In Britain, with its now well-established tradition of steam power, coal, and coal gas, such a market was not immediately obvious. But in continental Europe and North America there was more scope for experiment. In the United States Thomas Edison applied his inventive genius to finding fresh uses for electricity, and his development of the carbon-filament lamp showed how this form of energy could rival gas as a domestic illuminant. The problem had been that electricity had been used successfully for large installations such as lighthouses in which arc lamps had been powered by generators on the premises, but no way of subdividing the electric light into many small units had been devised. The principle of the filament lamp was that a thin conductor could be made incandescent by an electric current provided that it was sealed in a vacuum to keep it from burning out. Edison and the English chemist Sir Joseph Swan experimented with various materials for the filament and both chose carbon. The result was a highly successful small lamp, which could be varied in size for any sort of requirement. It is relevant that the success of the carbon-filament lamp did not immediately mean the supersession of gas lighting. Coal gas had first been used for lighting by William Murdock at his home in Redruth, Cornwall, where he was the agent for the Boulton and Watt company, in 1792. When he moved to the headquarters of the firm at Soho in Birmingham in 1798, Matthew Boulton authorized him to experiment in lighting the buildings there by gas, and gas lighting was subsequently adopted by firms and towns all over Britain in the first half of the 19th century. Lighting was normally provided by a fishtail jet of burning gas, but under the stimulus of competition from electric lighting the quality of gas lighting was greatly enhanced by the invention of the gas mantle. Thus improved, gas lighting remained popular for some forms of street lighting until the middle of the 20th century.
Lighting alone could not provide an economical market for electricity because its use was confined to the hours of darkness. Successful commercial generation depended upon the development of other uses for electricity, and particularly on electric traction. The popularity of urban electric tramways and the adoption of electric traction on subway systems such as the London Underground thus coincided with the widespread construction of generating equipment in the late 1880s and 1890s. The subsequent spread of this form of energy is one of the most remarkable technological success stories of the 20th century, but most of the basic techniques of generation, distribution, and utilization had been mastered by the end of the 19th century. Internal-combustion engine
Electricity does not constitute a prime mover, for however important it may be as a form of energy it has to be derived from a mechanical generator powered by water, steam, or internal combustion. The internal-combustion engine is a prime mover, and it emerged in the 19th century as a result both of greater scientific understanding of the principles of thermodynamics and of a search by engineers for a substitute for steam power in certain circumstances. In an internal-combustion engine the fuel is burned in the engine: the cannon provided an early model of a single-stroke engine; and several persons had experimented with gunpowder as a means of driving a piston in a cylinder. The major problem was that of finding a suitable fuel, and the secondary problem was that of igniting the fuel in an enclosed space to produce an action that could be easily and quickly repeated. The first problem was solved in the mid-19th century by the introduction of town gas supplies, but the second problem proved more intractable as it was difficult to maintain ignition evenly. The first successful gas engine was made by Étienne Lenoir in Paris in 1859. It was modeled closely on a horizontal steam engine, with an explosive mixture of gas and air ignited by an electric spark on alternate sides of the piston when it was in midstroke position. Although technically satisfactory, the engine was expensive to operate, and it was not until the refinement introduced by the German inventor Nikolaus Otto in 1878 that the gas engine became a commercial success. Otto adopted the four-stroke cycle of induction-compression-firing-exhaust that has been known by his name ever since. Gas engines became extensively used for small industrial establishments, which could thus dispense with the upkeep of a boiler necessary in any steam plant, however small. Petroleum