lesskey
lesskey используется для установок клавиш less.
Зависимости Less
Последняя проверка: версия 358.
Bash: sh Binutils: as, ld Diffutils: cmp Fileutils: chmod, install, mv, rm, touch Grep: egrep, grep Gcc: cc1, collect2, cpp0, gcc Make: make Sed: sed Sh-utils: expr, hostname, uname Textutils: cat, tr
Установка Groff-1.18
Приблизительное время компиляции: 1.08 SBU
Необходимое дисковое пространство: 18 MB
Инсталляция Groff
Для инсталляции Groff выполните:
./configure –prefix=/usr &&
make PROCESSEDEXAMPLEFILES="" &&
make PROCESSEDEXAMPLEFILES="" install &&
ln -s soelim /usr/bin/zsoelim &&
ln -s eqn /usr/bin/geqn &&
ln -s tbl /usr/bin/gtbl
Пояснения команд
make PROCESSEDEXAMPLEFILES="": У Groff существует несколько зависимостей, которые мы не будем устанавливать. Эта опция отключает потребность в них.
ln -s ...: Эти символические ссылки необходимы для корректной работы некоторых программ xman и других программ работы с документами groff/man.
Contents of Groff
Last checked against version 1.17.2.
Program Files
addftinfo, afmtodit, eqn, geqn (link to eqn), grn, grodvi, groff, grog, grolbp, grolj4, grops, grotty, gtbl (link to tbl), hpftodit, indxbib, lkbib, lookbib, mmroff, neqn, nroff, pfbtops, pic, post-grohtml, pre-grohtml, refer, soelim, tbl, tfmtodit, troff and zsoelim (link to soelim)
Descriptions
addftinfo
addftinfo reads a troff font file and adds some additional font-metric information that is used by the groff system.
afmtodit
afmtodit creates a font file for use with groff and grops.
eqn
eqn compiles descriptions of equations embedded within troff input files into commands that are understood by troff.
geqn
geqn is the GNU implementation of eqn.
grn
grn is a groff preprocessor for gremlin files.
grodvi
grodvi is a driver for groff that produces TeX dvi format.
groff
groff is a front-end to the groff document formatting system. Normally it runs the troff program and a post-processor appropriate for the selected device.
grog
grog reads files and guesses which of the groff options -e, -man, -me, -mm, -ms, -p, -s, and -t are required for printing files, and prints the groff command including those options on the standard output.
grolbp
grolbp is a groff driver for Canon CAPSL printers (LBP-4 and LBP-8 series laser printers).
grolj4
grolj4 is a driver for groff that produces output in PCL5 format suitable for an HP Laserjet 4 printer.
grops
grops translates the output of GNU troff to Postscript.
grotty
grotty translates the output of GNU troff into a form suitable for typewriter-like devices.
gtbl
gtbl is the GNU implementation of tbl.
hpftodit
hpftodit creates a font file for use with groff -Tlj4 from an HP tagged font metric file.
indxbib
indxbib makes an inverted index for the bibliographic databases a specified file for use with refer, lookbib, and lkbib.
lkbib
lkbib searches bibliographic databases for references that contain specified keys and prints any references found on the standard output.
lookbib
lookbib prints a prompt on the standard error (unless the standard input is not a terminal), reads from the standard input a line containing a set of keywords, searches the bibliographic databases in a specified file for references containing those keywords, prints any references found on the standard output and repeats this process until the end of input.
mmroff
mmroff is a simple preprocessor for groff.
neqn
The neqn script formats equations for ascii output.
nroff
The nroff script emulates the nroff command using groff.
pfbtops
pfbtops translates a Postscript font in .pfb format to ASCII.
pic
pic compiles descriptions of pictures embedded within troff or TeX input files into commands that are understood by TeX or troff.
pre-grohtml and post-grohtml
pre– and post-grohtml translate the output of GNU troff to html.
refer
refer copies the contents of a file to the standard output, except that lines between .[ and .] are interpreted as citations, and lines between .R1 and .R2 are interpreted as commands about how citations are to be processed.
soelim
soelim reads files and replaces lines of the form .so file by the contents of file.
tbl
tbl compiles descriptions of tables embedded within troff input files into commands that are understood by troff.
tfmtodit
tfmtodit creates a font file for use with groff -Tdvi.
troff
troff is highly compatible with Unix troff. Usually it should be invoked using the groff command, which will also run preprocessors and post-processors in the appropriate order and with the appropriate options.
zsoelim
zsoelim is the GNU implementation of soelim.
Groff Installation Dependencies
Last checked against version 1.17.2.
Bash: sh Binutils: ar, as, ld, ranlib Bison: bison Diffutils: cmp Fileutils: chmod, cp, install, ln, ls, mkdir, mv, rm, touch Gcc: cc1, cc1plus, collect2, cpp0, g++, gcc Grep: egrep, grep Make: make Gawk: awk Sed: sed Sh-utils: basename, date, echo, expr, hostname, uname Textutils: cat, tr
Установка Textutils-2.1
Приблизительное время компиляции: 0.83 SBU Необходимое дисковое пространство: 17 MB
Инсталляция Textutils
Для инсталляции Textutils выполните:
./configure –prefix=/usr && make && make install && mv /usr/bin/{cat,head} /bin
Содержимое Textutils
Последняя проверка: версия 2.0.
Программы
cat, cksum, comm, csplit, cut, expand, fmt, fold, head, join, md5sum, nl, od, paste, pr, ptx, sort, split, sum, tac, tail, tr, tsort, unexpand, uniq и wc
Описание
cat
cat выводит файлы на стандартный вывод.
cksum
cksum выводит контрольную сумму CRC и объем в байтах каждого указанного файла.
comm
comm построчно сравнивает два отсортированных файла.
csplit
csplit выводит части файла, разделенные заданными строками, в файлы xx01, xx02, ..., и размер каждой части на стандартный вывод.
cut
cut выводит указанные строки из указанных файлов на стандартный вывод.
expand
expand конвертирует знаки табуляции в файле в пробелы и выводит результат на стандартный вывод.
fmt
fmt форматирует каждый абзац в указанных файлах и выводит результат на стандартный вывод.
fold
fold делает переносы вводимых строк из указанных файлов (по умолчанию, со стандартного ввода) и выводит результат на стандартный вывод.