I managed to not kill myself today, even though I was working with high voltage. Well, it’s not as exciting as all that. I disconnected the line before I fucked with it.
As instructed, I turned a rover charging cable into a drill power source. Getting the voltage was a simple matter of adding resistors, which my electronics kit has in abundance.
I had to make my own a 9 Amp breaker. I strung three 3A breakers in parallel. There’s no way for 9A to get through that without tripping all three in rapid succession.
Then I had to rewire a drill. Pretty much the same thing I did with Pathfinder. Take out the battery and replace it with a power line from the Hab. But this time it was a lot easier.
Pathfinder was too big to fit through any of my airlocks, so I had to do all the rewiring outside. Ever done electronics while wearing a space suit? Pain in the ass. I even had to make a workbench out of MAV landing struts, remember?
Anyway, the drill fit in the airlock easily. It’s only a meter tall, and shaped like a jackhammer. We did our rock sampling standing up, like Apollo astronauts.
Also, unlike my Pathfinder hatchet-job, I had the full schematics of the drill. I removed the battery and attached a power line where it used to be. Then, taking the drill and it’s new cord outside, I connected it to the modified rover charger and fired it up.
Worked like a charm! The drill whirled away with happy abandon. Somehow, I had managed to do everything right the first try. Deep down, I thought I’d fry the drill for sure.
It wasn’t even midday yet. I figured why not get a jump on drilling?
[10:07] Watney: Power line modifications complete. Hooked it up to a drill, and it works great. Plenty of daylight left. Send me a description of that hole you want me to cut.
[10:25] JPL: Glad to hear it. Starting on the cut sounds great. Just to be clear, these are modifications to Rover 1, which we’ve been calling “the trailer.” Rover 2 (the one with your modifications for the trip to Pathfinder) should remain as-is for now.
You’ll be taking a chunk out of the roof, just in front of the airlock in the rear of the vehicle. The hole needs to be at least 2.5m long and the full 2m width of the pressure vessel.
Before any cuts, draw the shape on the trailer, and position the trailer where Pathfinder’s camera can see it. We’ll let you know if you got it right.
[10:43] Watney: Roger. Take a pic at 11:30 if you haven’t heard from me by then.
The rovers are made to interlock so one can tow the other. That way you can rescue your crewmates if the shit hits the fan. For that same reason, rovers can share air via hoses you connect between them. That little feature will let me share atmosphere with the trailer on my long drive.
I’d stolen the trailer’s battery long ago; it had no ability to move under it’s own power. So I hitched it up to my awesomely modified rover and towed it in to place near Pathfinder.
Venkat told me to “draw” the shape I plan to cut, but he neglected to mention how. It’s not like I have a Sharpie that can work out on the surface. So I vandalized Martinez’s bed.
The cots are basically hammocks. Lightweight string woven loosely into something that’s comfortable to sleep on. Every gram counts when making stuff to send to Mars.
I unraveled Martinez’s bed and took the string outside. I taped it to the trailer hull along the path I planned to cut. Yes, of course duct tape works in a near-vacuum. Duct tape works anywhere. Duct tape is magic and should be worshiped.
I can see what NASA has in mind. The rear of the trailer has an airlock that we’re not going to mess with. The cut is just ahead of it, and will leave plenty of space for The Big Three to stand.
I have no idea how NASA plans to power the Big Three for 24½ hours a day and still have energy left to drive. I bet they don’t know, either. But they’re smart; they’ll work something out.
[11:49] JPL: What we can see of your planned cut looks good. We’re assuming the other side is identical. You’re cleared to start drilling.
[12:07] Watney: That’s what she said.
[12:25] JPL: Seriously, Mark? Seriously?
First, I depressurized the trailer. Call me crazy, but I didn’t want the drill explosively launched at my face.
Then I had to pick somewhere to start. I thought it’d be easiest to start on the side. I was wrong.
The roof would have been better. The side was a hassle because I had to hold the drill parallel to the ground. This isn’t your dad’s Black & Decker we’re talking about. It’s a meter long and only safe to hold by the handles.
Getting it to bite was nasty. I pressed it against the hull and turned it on, but it wandered all over the place. So I got my trusty hammer and screwdriver. With a few taps, I made a small chip in the carbon composite.
That gave the bit a place to seat, so I could keep drilling in one place. As NASA predicted, it took about two minutes to get all the way through.
I followed the same procedure for the second hole and it went much smoother. After the third hole, the drill’s overheat light came on.
It wasn’t designed to operate constantly for so long. Fortunately, it sensed the overheat and warned me. So I leaned it against the workbench for a few minutes and it cooled down. One thing you can say about Mars: It’s really cold. The thin atmosphere doesn’t conduct heat very well, but it cools everything eventually.
I had already removed the drill’s cowling (the power cord needed a way in). A pleasant side effect is the drill cools even faster. Though I’ll have to clean it thoroughly every few hours as dust accumulates.
By 17:00, when the sun began to set, I had drilled 75 holes. A good start, but there’s still tons to do. Eventually (probably tomorrow) I’ll have to start drilling holes that I can’t reach from the ground. For that I’ll need something to stand on.
I can’t use my “workbench.” It’s got Pathfinder on it, and the last thing I’m going to do is mess with that. But I’ve got three more MAV landing struts. I’m sure I can make a ramp or something.
Anyway, that’s all stuff for tomorrow. Tonight is about eating a full ration for dinner.
Awww yeah. That’s right. I’m either getting rescued on Sol 549 or I’m dying. That means I have 35 days of extra food. I can indulge once in a while.
I average a hole every 3.5 minutes. That includes the occasional breather to let the drill cool off.
I learned this by spending all damn day drilling. After 8 hours of dull, physically intense work, I had 137 holes to show for it.
It turned out to be easy to deal with places I couldn’t reach. I didn’t need to modify a landing strut after all. I just had to get something to stand on. I used a geological sample container (also known as “a box”).
Before I was in contact with NASA, I would have worked more than 8 hours. I can stay out for 10 before even dipping in to “emergency” air. But NASA’s got a lot of Nervous Nellies who don’t want me out longer than spec.
With today’s work, I’m about ¼ of the way through the whole cut. At least, ¼ of the way through the drilling. Then I’ll have 759 little chunks to chisel out. And I’m not sure how well carbon composite is going to take to that. But NASA’ll do it a thousand times back on Earth and tell me the best way to get it done.
Anyway, at this rate, it’ll take 4 more days of (boring-ass) work to finish the drilling.
I’ve actually exhausted Lewis’s supply of shitty ’70’s TV. And I’ve read all of Johanssen’s mystery books.